Replacing Program Text - Siemens SINUMERIK 840D sl Operating Manual

Further search options
Softkey
4.10.2

Replacing program text

You can find and replace text in one step.
Requirement
The desired program is opened in the editor.
Procedure
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
- OR -
Activate the "Exact expression" checkbox if, for example, you want to
search for place holders ("*", "?") in program lines.
4. Position the cursor in the "Direction" field and choose the search
direction (forward, backward) with the <SELECT> key.
5. Press the "OK" softkey to start the search.
If the text you are searching for is found, the corresponding line is
highlighted.
6. Press the "Continue search" softkey if the text located during the search
does not correspond to the point you are looking for.
- OR -
Press the "Cancel" softkey when you want to cancel the search.
Function
The cursor is set to the first character in the program.
The cursor is set to the last character in the program.
1. Press the "Search" softkey.
A new vertical softkey bar appears.
2. Press the "Find and replace" softkey.
The "Find and Replace" window appears.
Machining the workpiece
4.10 Editing a program
115