Hardware And Software Components - Siemens S7 Series Communication Instruction Manual

2 Solution
2.3

Hardware and software components

This application example was created with the following components:
Hardware components
Table 2-3: Hardware components
Component
POWER MODULE
PM1207
SIMATIC S7-1214C
DC/DC/DC FW4.2
Compact Switch
Module
"Triple-X PROFINET +
KNX"
universal gateway
(RS485)
Siemens Gamma KNX
room control unit
Siemens Gamma KNX
wall switch triple
Siemens Gamma KNX
bus coupling unit
Siemens Gamma KNX
power supply
Siemens Gamma KNX
USB interface
Communication with S7 CPU via KNX Gateway
Entry ID: 109739689, V1.0,
No. Article number
1 6EP1332-1SH71
1 6ES7214-1AG40-
0XB0
1 6GK7277-1AA00-
0AA0
1 Manufacturer: MBS
GmbH
Operating system:
Linux 2.6.34.7 #267
Software module:
V2_05W
Hardware module:
15.1.1
1 5WG1227-2AB11
1 5WG1223-2DB13
1 5WG1117-2AB12
1 5WG1125-1AB01
5WG1148-1AB12
1
06/2017
Note
Power supply
input: 120/230 V AC
output: 24 V DC/2.5 A
Alternatively, any other S7-1200
CPU (FW4.1 or higher) or S7-
1500 CPU (FW1.7 or higher) can
be used.
(optional)
The switch is only required if you
want to simultaneously access
(without "replugging") the S7-1200
and the gateway from the PG/PC.
http://www.mbs-
solutions.de/profinet-knx
For the versions on the left, visit
the gateway web server's page,
"Help > Device info".
Alternative: RS232
Operating and installation
instructions
https://support.industry.siemens.c
om/cs/ww/en/view/76776544
-
-
Optional. Interface for
programming the KNX devices.
8