Commands In This Section - Dell N1100-ON Reference Manual

Commands in this Section

This section explains the following commands:
show sntp configuration
show sntp server
show sntp status
sntp authenticate
sntp authentication-key
sntp broadcast client enable
sntp client poll timer
sntp server
sntp source-interface
show sntp configuration
Use the show sntp configuration command to show the configuration of the
Simple Network Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Loopback interfaces are not supported on the N1100-ON Series switches.
sntp trusted-key
sntp unicast client enable
clock set
clock timezone hours-offset
no clock timezone
clock summer-time recurring
clock summer-time date
no clock summer-time
show clock
Switch Management Commands
1846