Sflow Configuration; Sflow Agent; Sflow Collector - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
8
C h a p t e r

SFLOW Configuration

Table of Contents

sflow agent.......................................................................43

sflow collector ...................................................................43

sflow enable .....................................................................44
sflow sample.....................................................................44
sflow agent
Use this command to set the IP address of sflow agent, and specify
the local UDP port to communicate with sflow collector.
Global configuration
sflow agent-config ip-address <ipaddress>[udp-port <port
number>]
no sflow agent-config ip-address <ipaddress>
<ipaddress>
<port number>
� Only ZXR10 6900 series supports this function.
� Local port is the communication port which is used by sflow
agent to send sflow sample package.
� This example describes how to set IP address of sflow agent
as 10.60.80.99, and use the default port to communicate.
ZXR10(config)#sflow agent-config ip-address 10.60.80.99
� This example describes how to set IP address of sflow agent
as 10.60.80.99, and use port 5600 to communicate.
ZXR10(config)#sflow agent-config ip-address 10.60.80.99 udp-port 5600
sflow collector
Use this command to set IP address of sflow collector, and specify
the remote UDP port to communicate with sflow agent.
Confidential and Proprietary Information of ZTE CORPORATION
Sflow agent address, can be any valid address
The local UDP port which is used by agent to
communicate with collector. 6343 by default.
43