ZXR10 Command Manual (Security Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
70
Confidential and Proprietary Information of ZTE CORPORATION
crypto ipsec transform-set
Use this command to create or delete the transform set used for
IPsec protection.
Global configuration
crypto ipsec transform-set <transform-set-name>[transfo
rm1 | transform2 | transform3]
no crypto ipsec transform-set <transform-set-name>
<transform-set-na
me>
<transform>
�
The platform version 4.8.01 and upgrade versions support the
command.
�
It is mainly implemented on GAR currently.
�
A transform set can define 3 transforms at most.
This example describes how to create IPSec transform set.
ZXR10(config)#crypto ipsec transform-set myset
ah-md5-hmac esp-3des
ZXR10(config)#show crypto ipsec transform-set myset
Transform set "myset": {ah-md5-hmac,esp-3des}
will negotiate = {Transport}
ZXR10(config)#no crypto ipsec transform-set myset
ZXR10(config)#show crypto ipsec transform-set
ZXR10(config)#
show crypto ipsec transform-set
crypto ipsec transform-set
crypto ipsec transform-set
encapsulation-mode
Use this command to set the transform set encapsulation mode
when the transform set exists.
Global configuration
crypto ipsec transform-set <transform-set-name> encapsula
tion-mode {transport | tunnel}
no crypto ipsec transform-set <transform-set-name> encaps
ulation-mode
Transform set name, a string not more than
20 characters
There are 3 transforms at most in a transform
set.