Lfap Flow-Expired-Time; Lfap Ka-Interval; Lfap Max-Send-Fun-Size - Zte ZXR10 Command Manual

ZXR10 Command Manual (Network Management Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Purpose
30 Confidential and Proprietary Information of ZTE CORPORATION

lfap flow-expired-time

Use this command to set flow expired time interval of LFAp. Delete
the setting with the no form of this command.
Global configuration
lfap flow-expired-time <second>
no lfap flow-expired-time
<second>
The flow expired time interval of LFAP is 600 seconds by default.
This example describes how to set the flow expired time interval
to 900 seconds.
ZXR10(config)#lfap flow-expired-time 900

lfap max-send-fun-size

lfap update-interval

lfap ka-interval

Use this command to set the keep-alive time interval between LFAP
and the LFAP server. Delete the setting with the no form of this
command.
Global configuration
lfap ka-interval <second>
no lfap ka-interval
<second>
The keep-alive time interval between LFAP and the LFAP server
(FAS) is 60 seconds by default.
This example describes how to set the keep-alive time interval
between LFAP and the LFAP server (FAS) to 120 seconds.
ZXR10(config)#lfap ka-interval 120

lfap max-send-fun-size

Use this command to set the maximum number of updating flows.
Delete the setting with the no form of this command.
Expired time for LFAP flow, in seconds, range:
60~60000
Keep-alive time interval between LFAP and
the LFAP server (FAS), in seconds, range:
2~2000