Other Common Configurations; Upnp - Zte ZXV10 W300 User Manual

Fehler! Formatvorlage nicht definiert.
After successful configurations, a configuration successful
window appears as shown in FIGURE 13.
FIGURE 13 Configuration Successful Window

4.6 Other Common Configurations

4.6.1 UPnP

When the ZXV10 W300 device operates in Routing mode, if
the terminal user use special applications like BitComet or
BitSpirit, the UpnP function should be enabled to optimize the
device performance.
To configure this function:
25
PVC Setting > Connection Type > WAN Setting >
LAN Settings > Wireless Setup > Summary.
Configure DHCP and Bridge in this order:
PVC Setting > Connection Type > LAN Settings >
Wireless Setup > Summary
Fehler! Formatvorlage nicht definiert.