Drop-Mode Wred; Priority - Zte ZXR10 Command Manual

ZXR10 Command Manual (QoS Volume)
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
8 Confidential and Proprietary Information of ZTE CORPORATION
<session-index>
This command is disabled by default.
It is applied to ZXR10 T160G and ZXR10 5900.
This example describes how to configure tail drop policy table 1.
ZXR10(config)#interface vlan10
ZXR10(config-if)#drop-mode tail-drop 1
tail-drop
show qos tail-drop
show running-config interface

drop-mode wred

Use this command to configure port WRED drop policy. Delete this
configuration with the no command.
Interface configuration
drop-mode wred <session-index>
no drop-mode
<session-index>
This command is disabled by default.
It is applied to ZXR10 3900/3200.
This example describes how to configure port drop policy by using
WRED drop policy table 1.
ZXR10(config)#interface vlan10
ZXR10(config-if)#drop-mode wred 1
tail-drop
show qos tail-drop
show running-config interface

priority

Use this command to configure the port default priority. Restore
the default configuration with the no command.
Interface configuration
priority <value>
Tail drop policy table number, range: 0~4
WRED drop policy table number. 0~3. If the
interface is L2 fei interface, the range is 0~1.
If the interface is L2 gei interface, the range
is 2~3.