Show Vlan Protocol-Map - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
26 Confidential and Proprietary Information of ZTE CORPORATION
Field
Session-id
Isolate port
Promis port

show vlan protocol-map

Use this command to display information about the configuration
of the protocol-based VLAN partion.
All modes except user EXEC
show vlan protocol-map [<session id>]
<session id>
� The platform version 4.6.02 and upgrade versions support this
command.
� If there is no parameter after this command, information about
the configuration of all protocol-based VLANs is displayed.
� The session ID is 1~12 for ZXR10 3900, and 1~16 for ZXR10
5900/T160G/T64G/T40G.
� This example describes how to display information about the
configuration of all protocol-based VLANs.
ZXR10#show vlan protocol-map
Session_no Frame-type
1 ethernet2
2 ethernet2
� This example describes how to display information about the
configuration of one protocol-based VLAN.
ZXR10#show vlan protocol-map 1
Session_no Frame-type
1 ethernet2
The displayed field descriptions are displayed as follows.
Field
Session_no
Frame-type
Ethernet-type
VLAN
Description
Session ID of the PVLAN, range: 1~20
Isolate port
Promiscuous port
Session ID of the designated PVLAN
Ethernet-type VLAN
0x0800 2
0x0900 3
Ethernet-type VLAN
0x0800 2
Description
Session number
Frame type
Ethernet encapsulation type
Native VLAN ID