Parameterization Via Wago-I/O-Check; User Interface - WAGO I/O-SYSTEM 750 Manual

22 • 750-562 [2 AO 0/+-10V DC 16 Bit]
Parameter Setting

2.1.1.9.3 Parameterization via WAGO-I/O-CHECK

The module can be parameterized easily with the start-up tool WAGO-I/O-
CHECK.

2.1.1.9.3.1 User Interface

The user interface of the 2-channel output module parameterizing dialog is
divided into the following areas.
Fig. 2.1.1-7: User interface of the parameterization dialog
1. Title bar (see chapter 2.1.1.9.3.1.1, "Title Bar")
2. Toolbar (see chapter 2.1.1.9.3.1.2, "Toolbar")
3. Navigation bar (see chapter 2.1.1.9.3.1.3, "Navigation Bar")
4. Input and selection fields (see chapter 2.1.1.9.3.1.4, "Input and Selection
Fields")
5. Status indicator (see chapter 2.1.1.9.3.1.5, "Status Indication")
These areas will be explained in more detail in the following chapters.
WAGO-I/O-SYSTEM 750
I/O Modules