Parameterization Of I/O Modules - WAGO I/O SYSTEM 750 750-833 Manual

Attention
One of these configuration modules has to be placed in the first module slot
of the configuration table. Otherwise, the bus coupler signals a configuration
error on the BUS-LED and in the status signal of the PROFIBUS diagnostics
if it was released when parametering the bus coupler.

3.8.2 Parameterization of I/O Modules

Note
You can find a list of all I/O modules with all possible parameters in chapter
5.4 "Configuration and Parameterization of the I/O Modules".
WAGO-I/O-SYSTEM 750
Bus System
Programmable Field Bus Controller 750-833
Configuration and Parameterization of the Modules
• 89