All Profibus Dp And Profinet Io Fieldbus Couplers; Profibus Dp Fieldbus Coupler 750-333(/0Xx-000), 750-833(/0Xx-000); Table 44: Specific Module / Channel Parameters For 750-496; Table 45: General Module / Channel Parameters - WAGO 750-496 Manual

WAGO-I/O-SYSTEM 750
750-496 8AI 0/4-20mA S.E.
10.1.2.1

All PROFIBUS DP and PROFINET IO Fieldbus Couplers

The following assignment applies to the parameters of the I/O module when using
PROFIBUS DP and PROFINET IO fieldbus devices.

Table 44: Specific module / channel parameters for 750-496

GSD File
Description
Number format Twos complement*)
Noise filter
Signal type
Channel x
(x = 0...7)
Input filter
(25 Hz)
Kanal x
(x = 0 ... 7)
*)
Factory setting
10.1.2.2 PROFIBUS DP Fieldbus Coupler
750-333(/0xx-000), 750-833(/0xx-000)
The aforementioned fieldbus couplers allow module-specific parameterization of
behavior at diagnosis.

Table 45: General module / channel parameters

Parameter
Diagnosis
Channel x (x = 0 ... 7)
*)
Factory setting
Manual
Version 1.2.0
Value
Sign magnitude
deactivated*)
activated
deactivated
0-20 mA
4-20 mA*)
3.6-21 mA (Namur NE43)
*)
deactivated
activated
Value
*)
0 (disabled)
1 (enabled)
WAGO-I/O-CHECK
Selection box Value
Number format Twos complement*)
Sign magnitude
Noise-Filter Checkbox
deactivated*)
activated
Signal type deactivated
0-20 mA
4-20 mA*)
3.6-21 mA (Namur NE43)
Input filter Checkbox
(25 Hz) deactivated
activated
Explanation
The fieldbus coupler signals a diagnosis if the
I/O module reports the events:
• Measuring range overflow
• Measuring range underflow
Diagnostics reported by the I/O module do not
lead to the signaling of a diagnosis by the
fieldbus coupler.
Diagnostics reported by the I/O module lead to
the signaling of a diagnosis by the fieldbus
coupler.
Appendix 85
*)