All Profibus Dp And Profinet Io Fieldbus Couplers; Profibus Dp Fieldbus Couplers 750-333(/0Xx-000); Table 39: Device-Specific Parameters" Or "Specific Module/Channel Parameters; Table 40: General Module/Channel Parameters - WAGO 750 Series Manual

76 Commissioning
7.5.2.3

All PROFIBUS DP and PROFINET IO Fieldbus Couplers

The following association applies to the parameters of the I/O module in
connection with the use of WAGO-I/O-CHECK as well when using PROFIBUS
DP and PROFINET IO fieldbus devices.
Device-Specific Parameters" or "Specific Module/Channel Parameters"
Table 39:
GSD File
Name
Interference frequency
suppression
[I/O module]
Filter mode
[I/O module]
Bridge voltage
[U x (x = 1, 2)]
d
Reference voltage
[U x (x = 1, 2)]
ref
Smoothing
[U x, U x (x = 1, 2)]
d ref
Number format
[U x, U x (x = 1, 2)]
d ref
Factory setting
*)
7.5.2.4

PROFIBUS DP Fieldbus Couplers 750-333(/0xx-000)

PROFIBUS DP fieldbus couplers allow channel-specific behavior
parameterization for diagnostics.

Table 40: General Module/Channel Parameters

GSD File
Name
Diagnosis
[U x, U x (x = 1, 2)]
d ref
Factory setting
*)
Manual
Version 1.0.0
750-1491 2AI Resistor Bridge (Strain Gauge)
WAGO-I/O-CHECK
Value Name
10 Hz
*)
50 Hz
Interference frequency
suppression
60 Hz
[Common]
200 Hz
400 Hz
precise
Filter mode
[Common]
fast *)
Input deactivated
*)
+/-15 mV
+/-30 mV
Bridge voltage
+/-60 mV
[Input U
+/-120 mV
+/-240 mV
+/-360 mV
Input deactivated
5 V (internal) *)
Reference voltage
+/-5 V (external)
[Input U
+/-10 V (external)
+/-15 V (external)
*)
deactivated
weak Smoothing
[Input U
medium
strong
*)
Twos Complement Number format
[Input U
Sign magnitude
Value
disabled *)
enabled
WAGO I/O System 750
x (x = 1, 2)]
d
x (x = 1, 2)]
ref
x, U x (x = 1, 2)]
d ref
x, U x (x = 1, 2)]
d ref
WAGO-I/O-CHECK
Selection Box Value
Input diagnosis Off
[Input U x, U x
d ref
On
(x = 1, 2)]
Value
10 Hz
*)
50 Hz
60 Hz
200 Hz
400 Hz
precise
fast *)
Input deactivated
*)
±15 mV
±30 mV
±60 mV
±120 mV
±240 mV
±360 mV
Input deactivated
5 V (internal) *)
±5 V (external)
±10 V (external)
±15 V (external)
*)
deactivated
weak
medium
strong
*)
Twos Complement
Sign magnitude
*)