Adding The Repeater Information Using The Rx History - Icom ID-31A Advanced Instructions

Previous view
4
DR MODE <ADVANCED>

■ Adding the Repeater information using the RX History

This section describes how to add a new repeater in-
formation to the repeater list using the RX history.
Push [MENU]
q
Push D-pad( ) to select the root item ("RX Histo-
w 
ry"), and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select the RX history number that
e 
include the repeater you want to add to the repeater
list.
Push D-pad(Ent).
r
• The RX history detail screen is displayed.
t Push D-pad( ) to display "RXRPT1" and "RXRPT2."

Push .
y
Push D-pad( ) to select "Add To RPT List," and then
u

push D-pad(Ent).
Push D-pad( ) to select the repeater call sign you
i

want to add to the repeater list, and then push D-
pad(Ent).
• When only one call sign is displayed, directly push D-
pad(Ent).
• The display is switched from the RX HISTORY screen to
the REPEATER LIST EDIT screen of the MENU. The se-
lected repeater call sign is automatically programmed.
• If necessary, edit the contents. (pp. 4-21 to 4-28)
o Push D-pad( ) to select "<<Add To RPT List>>,"

and then push D-pad(Ent).
!0 Push D-pad( ) to select "YES," and then push D-

pad(Ent).
• The programmed contents are added to the repeater list,
and the transceiver returns to the RX HISTORY screen.
How to switch the name display:
When the call sign is displayed on the RX HISTORY
screen, you can switch the display type to "Name
Display."
When the repeater name is not programmed in the
repeater list, the display does not switch to the name
display. It is convenient that you find a repeater that
is not included in the repeater list.
When the RX
➥
TORY screen is dis-
played, push
display the Quick menu.
Push D-pad( ) to select

"Name Display,"
then push D-pad(Ent).
.
HIS-
to
and
4-30
RX history number
"RXRPT1" and
"RXRPT2" are
displayed.
Example:
"JP1YJJ A" is
added.