Setting The Vox Function - Icom IC-F29DR3 Operating Instructions Manual

5
SETTINGS

Setting the VOX function

You can turn the VOX function ON or OFF. The VOX
function automatically switches between receive and
transmit using your voice.
NOTE:
• To use the function, a headset and a VOX
converter cable are required (purchase separately).
• Turn ON the Beep function (p. 16) before setting
the VOX function.
1. Rotate [VOL] to turn OFF the transceiver.
2. Set [Rotary Selector] to any channel other than
Channel 16.
3. While holding down [PTT] and [Upper], rotate
[VOL] to turn ON the transceiver, to turn the VOX
function ON or OFF.
• When the VOX function is turned OFF, an opening
beep and a beep sound, and the selected channel
number is announced.
• When the VOX function is turned ON, an opening
beep and two beeps sound, and the selected channel
number is announced.
4. Rotate [VOL] to turn OFF the transceiver, then
turn ON again to restart normal operation.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
[Rotary Selector]
[PTT]
[Upper]
22
[VOL]