Time Set Items - Icom ID-31A PLUS Advanced Manual

11
MENU SCREEN

Time Set items

NOTE: The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version's default settings, see page 11-3�
DATE
MENU > Time Set > Date/Time > DATE
Manually set the date to between 2000/01/01 and
2099/12/31�
TIME
MENU > Time Set > Date/Time > TIME
Manually set the time that is displayed at the top of the
screen� The time is displayed in the 24 hour format�
L When GPS Time Correct is set to "Auto," the GPS
receiver automatically sets the time by calculating the
received Universal Time of Coordinated (UTC) time and
UTC Offset�
GPS Time Correct
MENU > Time Set > GPS Time Correct
This function corrects the time by using the time
information that a GPS sentence contains�
It is corrected by calculating the received UTC time
and the "UTC Offset" setting�
• OFF: Does not correct the time.
• Auto: Automatically corrects the time.
UTC Offset
MENU > Time Set > UTC Offset
Set the time difference between UTC time and the
local time to between –14:00 and +14:00 in 00:05
steps�
Auto Power OFF
MENU > Time Set > Auto Power OFF
Select whether or not to automatically turn OFF the
transceiver after inactivity for this set period of time�
L "AUTO POWER OFF" is displayed and beeps sound
(Default: Auto)
• OFF:
• 30/60/90/120min: Turns OFF the transceiver after
11-45
5 seconds before turning OFF the transceiver� If you
operate the transceiver during this period of time, the
Auto Power OFF timer is reset�
Does not turn OFF the transceiver.
inactivity for this set period of time�
(Default: ±0:00)
(Default: OFF)