Checking The Position Of The Paper Exit Feeler - Ricoh MP C2504 Field Service Manual

• The Mylar's top edge should be 0-2.5mm from the top edge of the paper exit cover, i.e.
between the two red lines.
• The Mylar's side edge should be flush against the side of the cover, i.e. along the yellow
dotted line.
8. Reattach the paper exit tray and close the right door.
9. Reattach the removed paper exit feeler [A].
10. Do not use the lever supplied with the optional unit. Doing so may affect the stacking
function.
11. Turn ON the main power.
12. Check that paper output to the shift tray can be selected at the operation panel, and check
the operation.

Checking the Position of the Paper Exit Feeler

Check the following points for the paper exit feeler [A] at the paper exit.
Internal Shift Tray SH3070 (D691)
177