Table of Contents
Advertisement
When" ADD PAPER " is displayed, the machine is out of paper. Add paper
as explained below.
Pull up the paper feed lever [A] .
NOTE: If there is some paper is left in the
paper feed, take it out, first and add
it to the new stack before beginning
this procedure.
Open the front paper feed unit [B] by
moving it forward. See the illustration on
the right.
Bend the new stack of paper a few
times.
NOTE: Only use fresh unmarked paper.
Load the paper into the entrance.
NOTE: Make sure that the edge of the pa-
per is correctly set.
Close the front paper feed unit carefully.
Push back the paper feed lever, then
press the On Line key on the operation
panel.
146
ADDING PAPER
A
B
Advertisement
Table of Contents
