INSTALLATION
First of all set up the paper feed: The pa-
per feed comes in two parts which after
installation should be aligned with the
edges as shown in the opposite side
view. Before you begin, check you have
them the right way round. (Each part
has a slight protusion indicating the bot-
tom left corner.)
1-1) First, install the lower part of the
paper feed. Bend it away from you
and set it to the machine as shown
opposite. Next attached the feed ex-
tension to the lower feed.
1-2) Then install the upper part. Bend it
inwards and set it to the machine
as shown opposite. Attach the
other feed extension to the upper
feed.
190
Upper Paper Feed
Lower Paper Feed
extension
Lower Paper Feed
Document Table
(Upper Paper Feed )
extension
Upper Paper Feed
Paper Feed Edge
Lower Paper Feed