Ricoh MV74 Operator's Manual page 82

Switching Authorized Reception On/Off
Before you use Authorized Reception, you have to switch it on using
Function 62. If it is switched off, the machine will accept any incoming fax
message.
Press the Function key and
6,2,2,2,2,6,2 using the ten keypad.
Then press the Yes key.
key until " AUTHORIZED
Press the
k
ON/OFF " is displayed.
Press the Yes key.
Use the and the
j
feature on or off.
Press the Yes key to store your setting,
then press the Function key.
Selecting Whether to Accept or Reject Messages from Special Senders
Press the Function key and
6,2,2,2,2,6,3 using the ten key-pad,
then press the Yes key.
At this time, you can print a user parameter
list, you press the
key.
Press the Yes key, then press the
the keys until the settings for Switch
k
08 are displayed.
You need to change digit 3 by pressing
3 on the ten keypad. The result is
shown in the table opposite.
Finish: Press the Yes key, then press
the Function key.
REJECTING MESSAGES FROM CERTAIN SENDERS
keys to switch this
k
key and press the Start
j
j
SELECT LINE
AUTHORIZED ON/OFF
AUTHORIZED
ON
AUTHORIZED
ON
k
SETTING?
PRINT LIST
and
SWITCH 08:0000 0000
SWITCH 08:0000 1100
Digit 3
0: Only messages from Special Senders
are received.
1: All messages except those from
Special Senders are received.
Y/NEXT
k
Y/NEXT
k
Y/
j k
OFF
k
Y/
j k
OFF
Y/
j k
j
KPAD/Y/
j k
KPAD/Y/
j k
71