Reverse Order Printing - Ricoh MV74 Operator's Manual

This feature is only available when you install the optional Feature Expander.
Normally, the machine prints the pages of received messages in the order
that they were received.
However, with Reverse Order Printing, the machine will print the messages
from the last page first. This will make it easier to distribute the received fax
messages, and more convenient for reading them.
Reverse Order Printing will not take place unless you switch it on beforehand.
To switch this feature on or off, do the following:
Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
At this time, you can print user parameter list,
press the
j
key.
Press the Yes key, then press the
the keys until the settings for switch
k
10 are displayed. Change digit 0.
If you wish to change the setting, press
0 using the ten keypad.
To finish: Press the Yes key, then press
the Function key.
Cross-reference

REVERSE ORDER PRINTING

key and then press the the Start
Multi-Copy: see page 62.
SETTING?
PRINT LIST
and
j
SWITCH 10: 0000 0000
SWITCH 10: 0000 0001
Digit 0
0: Reverse order printing Off
1: Reverse order printing On
Y/
j
j
KPAD/
j k
KPAD/
j k
65