REJECTING MESSAGES FROM CERTAIN SENDERS
Programming the List of Senders for Authorized Reception
A terminal sending an incoming message always identifies itself to your
machine. The identification consists of an RTI or CSI. Before you can use
Authorized Reception, you must program a list of senders you wish to treat
differently. These senders and their RTI's/CSI's are known as Special
Senders. Use function 71 to enter this information(see the next page).
Authorized Recep-
tion ON / OFF
(Function 62)
OFF
ON
ON
ON
72
List of Special
Senders
(Function 71)
Empty/Not Empty
Empty
Not Empty
Not Empty
Switch 08 Digit 3
(Function 63)
X
X
0
1
Result
All messages are
received.
No messages are
received.
Only messages
from Special
Senders are
received
All messages
except those from
Special Senders
are received.