Ricoh MV74 Operator's Manual page 47

RECEIVING FAX MESSAGES WHEN THERE IS A PROBLEM
Switching Substitute Reception On or Off
If you wish to switch Substitute Reception on or off, do the following. (If you
need more information about the User Parameter Settings adjustment
procedure, see page 170)
Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
At this time, you can print a User Parameter
List. Press the
Press the Yes key. Press the
the settings for Switch 05 are displayed.
Change the settings of digit 0 and 1.
The meanings of these settings are as
follows.
Digit
0 Substitute Reception
Reception to memory when no RTI or CSI identifiers were received from the
1 other party
If you wish to change the setting, press
0 or 1 using the ten keypad.
Press the Yes key, then press the Function key.
36
key, then press the Start key.
j
key until
k
SETTING?
PRINT LIST
SWITCH 05:0000 0000
SWITCH 05:0000 0011
Purpose
0: Off
0 Enabled
Y/
j
j
KPAD/Y/
j k
KPAD/Y/
j k
Digit 1 0
1: On
1: Disabled