Table of Contents
Advertisement
PRINTING THE SELF TESTS
Nozzle Print
You can perform the Nozzle print whenever you want to verify that each print
head nozzle is operating properly.
Make sure the printer is off-line and the
machine is in standby mode.
Press the Function key and 3,5 using
the ten keypad, then press the Yes
key.
Press the
k
appears, then press the Yes key.
Press the
k
pears on the bottom line, then press the
Yes key. The printer starts to print the
NOZZLE print.
102
key until " SELF TEST"
key until " NOZZLE" ap-
READY 100%
SET DOC. OR DIAL NO.
FORM FEED
SELF TEST
FONT
SELF TEST
NOZZLE
11:16
Y/NEXT
k
Y/
j k
Y/
j k
Advertisement
Table of Contents
