Ricoh MV74 Operator's Manual page 33

SENDING A PAGE WITH VERY FINE DETAIL
Press Function and 6,2,2,2,2,6,3 using
the ten keypad, then press the Yes key.
At this time, you can print a User Parameter
List if you press the
key.
Press the Yes key. The settings for
switch 00 are now displayed. If you wish
to change to switch 01, press the
until the setting for switch 01 are dis-
played.The settingsyou need to change
the settings for switches 00 and 01. The
meaning of the various settings are laid
out below.
SWITCH 00
Digit
Resolution home position
4 to 5
Transmission mode home position
6
7 Halftone On/Off home position
SWITCH 01
Digit
If you change any of the resolution, transmission mode or halftone settings
before making a transmission, then:
7
0: The setting(s) will not return to the home position after the transmission.
1:The setting(s) will return to the home position after the transmission.
If you wish to change one of the set-
tings, press the key on the ten key pad
that corresponds to the digit that you
wish to change. For example press 7 to
change digit 7.
Finish: Press the Yes key, then press the Function key.
22
key, then press the Start
j
key
k
Digit 5 Digit 4 Setting
0 0 Standard
0 1 Detail
SETTING?
PRINT LIST
SWITCH 00: 0000 0000
Purpose
Digit 5
1
1
0: Memory Transmission
1: Immediate Transmission
0: Off
Purpose
SWITCH 00: 1000 0000
Y/
j
KPAD/Y/
j k
Digit 4 Setting
0 Fine
1 Do not use.
1: On
KPAD/Y/
j k
j