Rds (Remote Diagnostic System) - Ricoh MV74 Operator's Manual

If your machine has a problem, a service technician can perform various
diagnostic tasks over the telephone line from the service station to try to find
out what is wrong with it. The service technician can also use RDS to change
some of your machine's settings if you request it.
For RDS to work, you must switch it on before the service technician starts
the RDS operation.
For RDS operations, it may be necessary to stay near the machine.
RDS is automatically switched off 24 hours after it is Switched on.
Switching RDS On/ Off
Press the Function key and
6,2,2,2,2,6,2 using the ten keypad.
Then press the Yes key.
Press the
k
is displayed.
Press the Yes key.
Use the and the
j
feature on or off.
Press the Yes key to store your setting,
then press the Function key.
RDS
(Remote Diagnostic System)
key until " RDS ON/OFF "
keys to switch this
k
Y/NEXT
SELECT LINE
Y/NEXT
RDS ON/OFF
RDS
ON OFF
k
RDS
ON OFF
k
RDS 100% 10:00AM
SET DOC. OR DIAL NO.
k
k
Y/
j k
Y/
j k
89