Adding Paper - Ricoh MV310E Operator's Manual

Setting / Adding the Paper (&l)
MAINTAINING YOUR MACHINE
Setting/Adding Paper in the Optional Side Paper Feed Unit
Slide out the paper feed unit until
it stops. With both hands, remove
it by holding it up and lifting it out
at the same time.
El Press down the metal base
plate/paper until it clicks into
place.
l
Pull out the paper.
If you aren't changing the paper size, skip
this step and all others marked with an as-
terisk.
0
1
* Adjust the paper fences to the
paper size. To move a fence,
pinch the top lever in and slide
the fence in or out as shown.
Make sure the positions of the
two side fences match the paper
size by checking them against
the scale printed on the bottom of
the feed unit. The fences should
be aligned so that the inside edge
of each fence is just touching the
line of the scale.
83