Table of Contents
Advertisement
CALLING TO REQUEST A MESSAGE (POLLING)
Stored ID Override
This procedure will override the ID Code stored in your machine. The
override is only effective for this one transmission. The ID code can be
composed using digits 0 to 9 and/or A to F, but codes 0000 and FFFF may
not be used.
Follow both steps in any order:
Place your document in the feeder.
Press the Function key and 1,3 us-
ing the ten keypad, then press Yes.
Press the
ING ID? " is displayed, then press the
Yes key.
Enter the ID code that you wish to use
for this message. Example: 0824. Press
0,8,2,4 using the ten keypad.
Press the Yes key.
Press the Start key.
Your fax message is held on polling
standby.
NOTE: After transmission, this machine will clear the transmission file.
Options for Polling Transmission
When you set a document on the document feeder for Polling Transmission,
you also have the following options.
TTI On/ Off
Page Count
Press the
is displayed. Example: TTI option.
Press the Yes key.
84
key until " SET POLL-
k
key until the required option
k
TRANSMIT
DIAL FAX NUMBER
POLLING TRANS
PUSH START
SET OPTION
ID:
llll
SET OPTION
ID:0824
POLLING TRANS
PUSH START
READY
100% 10:00AM
POLL STANDBY,SECURE
SET OPTION
SET TTI PRINT?
SET OPTION
ON
OFF
k
OPTION
k
OPT
k
KPAD
Y/N
OPT
k
Y/
k
Y/
j
Advertisement
Table of Contents
