Ricoh MV74 Operator's Manual page 36

Example:The deadline is 10:15. Press
1,0,1,5,# using the ten keypad
To change AM/PM, press
the ten keypad.
Press the Yes key.
The TRD time cannot be more than 24 hours
into the future.
Cross -reference
Communication Result Report: see page 138.
Printing the Page Number (Immediate Transmission Only)
When your fax message is printed at the other end, page numbers will be
printed on the top of each page. Using the Page Count feature, you can
select the format in which the page numbers are printed.
NOTE: If you select Memory Transmission, Page Count is automatically
switched on and the pages are counted automatically. If you switch
TTI off, you cannot use this feature.
If you use Page Count:
Page numbers will be printed in batch-numbering format (for example P1/3,
P2/3, and P3/3 for a three-page message). This makes it easy for the other
party to see how many pages you sent and if any are missing. However, you
have to input the number of pages using the keypad before sending them.
If you do not use Page Count:
Page numbers will be printed only as a sequence (for example P1,P2,P3).
This makes it difficult for the other party to tell at a glance whether any pages
are missing (for example, due to a double feed in your machine's document
feeder).
OTHER FEATURES FOR TRANSMISSION
or # on
E
SET OPTION
TIME 10:15PM 10:00AM
*/#/N
25