Table of Contents
Advertisement
REPLACING THE INK CARTRIDGE
Install the new cartridge [G].
Fit tab [H ] cover slot [J]
Push the cartridge in.
Push the down lever [I].
NOTE:
Do not touch any of the copper
wiring inside the machine.
Do not shake the cartridge:
ink may come out.
Do not touch the print head [L]
on the ink cartridge.
Do not touch the terminals [K]
on the cartridge.
Close the front cover.
NOTE: Ensure the front cover is fully closed by
pushing down the center firmly until it
clicks into place. If you push the sides, it
will not lock into place and " CLOSE
COVER " report will appear on the screen.
Attach the document tray and the copy tray.
The machine will start Head Cleaning
automatically. The machine returns to
standby mode after cleaning has ended.
It takes more than 30 seconds.
NOTE:
If you keep the front cover open for more than ten minutes, the
ink cartridge will move to its home position.
After replacing the cartridge a test pattern is automatically
printed. If you wish to switch this off, see page 203.
148
L
G
J
K
I
H
Advertisement
Table of Contents
