Table of Contents
Advertisement
GLOSSARY
ADF (Automatic Document Feeder):
A device which feeds the pages of a multipage document one at a time, in
the order that you arranged the pages in the stack.
Batch Numbering (Page Count):
This is a way of numbering pages that allows you to check whether you
received all pages, and if not, which ones are missing. For example, if you
receive two pages with P1/2 printed on one and P2/3 on the other, you have
just received a three-page document but page 3 didn't make it.
BPS (Bits Per Second):
This is the data communication rate in G3 mode, your fax terminal digitises
documents, transforming them into 'bit'-binary digits- (an average page will
produce about 200,000 of them), and then sends them out at a top speed of
6,600 to 14,400 bps, depending on the model.
Broadcasting:
In G3 fax communication terminology, broadcasting is the transmission of a
document to more than one address in sequence, not simultaneously.
ITU-T:
Consultative Committee for International Telephone and Telegraph. This
committee sets international standards for communication.
Communication:
Transmission or reception.
Copy:
When used as a noun, this refers to a printout, either in copy mode or
receive mode.
Country Code:
In international dialling, this is the code that directs the call to the country
where the terminal that you wish to send to is located.
CSI:
Called Subscriber Identification.
Default Setting:
See "Factory Setting".
229
Advertisement
Table of Contents
