Table of Contents
Advertisement
OTHER FEATURES FOR TRANSMISSION
Example: Send at 11:30
Press 1,1,3,0, using the ten keypad.
To change AM/PM, press
the ten keypad.
Press the Yes key, then the Start key.
The Send Later time cannot be more than 24
hours into the future.
NOTE:
If you want to cancel this operation, you just remove the document
from the feeder.
Sending by a Specific Time
This feature is called Transmission Deadline (TRD). It is only available
when you install the optional Feature Expander. If your message has to be
sent to the other end before a certain time, use the Transmission Deadline
option and input this deadline.
If the line is busy, the machine will redial at set intervals either until the
message gets through or until the deadline passes. Before the deadline
passes, there is no limit to the number of times that the machine can redial.
After the deadline passes, the machine will print a report which indicates
whether or not your message was sent within the deadline. Then, the
message will be erased from memory.
NOTE:
This feature is only available with Memory Transmission.
Press the
displayed.
Press the Yes key.
24
key until " SET TRD? " is
k
or # on
E
SET OPTION
TIME 11:30PM 10:00AM
READY 97%
TRANS STANDBY
SET OPTION
SET TRD?
SET OPTION
TIME 00:00AM 10:00AM
*/#/N
10:00AM
Y/
k
KPAD/Y
Advertisement
Table of Contents
