Table of Contents
Advertisement
CHANGING AN EMULATION SWITCH SETTING
Press the Function key and
6,2,2,2,2,6,4 using the ten keypad, then
press the Yes key. On the bottom line of
the display the current settings of digits
1 to 9 are shown in sequence from the
left to right.
To change the required setting, press a
number from 2 to 9 using the ten key-
pad corresponding to the digit that you
wish to change. Example: Press 6 using
the ten keypad. The value of the digit 6
changes, in this case from 0 to 1.
Press the
key. Next, you can set dig-
k
its 10 to 13.
This time the current settings of digits
10 to 13 are shown in sequence from
left to right. To change digit 10, use the
0 key on the ten keypad. Similarly, to
change digit 11 use the 1 key , digit 12
the 2 key and digit 13 the 3 key using
the ten keypad.
Finish: Press the Yes key, then the Function key.
1
9 1-9/Y/
100010000
1
9 1-9/Y/
100011000
10
13
0-3/Y/
0000
j k
j k
j k
135
Advertisement
Table of Contents
