Ricoh MV74 Operator's Manual page 78

Preventing a Wrong Connection
This feature is called Closed Network Transmission. It is only available
when you install the optional Feature Expander.
This feature helps to avoid accidentally sending a fax message to a terminal
that is outside your network. The ID codes of the communicating machines
are checked. If they are not the same, the communication is stopped. The ID
Code is the same as the Polling ID (see page 81). This feature may not
reliable if you are communicating with a terminal produced by a different
maker.
Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
At this time, you can print a user parameter
list, press the
Press the Yes key. Then press the
and the keys until the settings for
k
switch 06 are shown. The setting that
you need to change is that for digit 2.
If you wish to change the setting, press
2 using the ten keypad.
Finish: Press the Yes key, then press
the Function key.
Cross-references
Polling ID: see page 81.
PROTECTION AGAINST WRONG CONNECTIONS
key and press the start key.
j
Closed Network Reception: see page 68.
SETTING?
PRINT LIST
j
SWITCH 06: 0000 0000
SWITCH 06: 0000 0100
Y/
j
j
KPAD/Y/
j k
KPAD/Y/
j k
Digit 2
0: ID Transmission Off
1: ID Transmission On
67