Table of Contents
Advertisement
Function
Print direction
Font typeface
Character set
International character set
Buffer
Automatic emulation switching
Text scale mode
Envelope mode
Smoothing mode
NOTE:
The default printer control mode is Epson LQ mode. If you change
this to BJ mode, the default settings also change.
Emulation Switch Settings
The emulation switch settings control various printer functions. The printer
functions defined by the emulation switches are determined by the printer
control mode. The printer has three control modes:
Epson LQ mode, which emulates the Epson LQ printers
BJ mode, which emulates IBM ProPrinter X24E
Canon Extended mode, which is used in the Canon Windows driver and
with some MS-DOS applications
Emulation digit 11 selects the printer control mode. When the emulation digit
11 is 1, the printer is in Epson LQ mode. When the emulation digit is 0, the
printer is in BJ mode.
NOTE:
In Extended mode, the printer overrides the Emulation switch set-
tings. Thus, when you are printing through the Windows environ-
ment, you can ignore the information regarding Emulation switches
and default settings.
To change the settings listed below, refer to instructions on page 135,
"Changing an Emulation Switch Setting".
CUSTOMIZING THE PRINTER
Setting
Bidirectional
Roman
Epson Italics Character set
USA
Input: 32KB
Download: 40KB
Disable
Disable
Disable
Disable
129
Advertisement
Table of Contents
