Ricoh MV74 Operator's Manual page 64

Storing a Memory Lock ID
This can be any four-digit code (using digits 0 to 9 ). Use a number between
0001 and 9999.
Press the Function key and
6,2,2,2,2,6,1 using the ten keypad, then
press the Yes key.
key, until " SET MEMORY
Press the
k
LOCK ID " is displayed, then press the
Yes key.
Input the MEMORY LOCK ID that you
will be using. Example: 1212
Press 1,2,1,2, using the ten keypad.
Use numbers between 0001 and 9999.
Press the Yes key.
Finish: Press the Function key.
Switching Memory Lock On/Off
Before you can use Memory Lock, you have to switch it on with Function 62.
NOTE: If you switch Memory Lock on, Forwarding will be automatically dis-
abled.
Press the Function key and
6,2,2,2,2,6,2 using the ten keypad, then
press the Yes key.
key until " MEMORY
Press the
k
LOCK ON/OFF " appears.
Press the Yes key.
Use the and
j
ture on or off.
Press the Yes key to store your setting, then press the Function key.
keys to switch this fea-
k
LOCKING INCOMING MESSAGES
SET MEMORY LOCK ID
LOCK ID
llll
LOCK ID
1212
LOCK ID
PROGRAMED
SELECT LINE
MEMORY LOCK ON/OFF
MEMORY LOCK
ON
MEMORY LOCK
ON
k
Y/NEXT
k
KPAD
Y/N
Y/N
Y/NEXT
k
Y/NEXT
k
Y/
j k
OFF
k
Y/
j k
OFF
53