Table of Contents
Advertisement
If You Wish to Use the Printer
To enter printer mode, follow the steps below.
Press the Function key and
6,2,2,2,2,6,2 using the ten keypad, then
press the Yes key.
Press the
k
FUNCTION " appears, press the Yes
key.
Press the
j
ON.
Press the Yes key to accept the setting. The machine will begin
initializing. Press the Function key to return to standby mode. When the
On-line indicator stops blinking, press the the On Line key.
NOTE: In this mode the machine can still
be used for faxing.
Leaving Printer Mode
If the On-Line indicator is lit, press the On-Line key. To leave the printer
mode, follow the steps below.
Press the Function key and
6,2,2,2,2,6,2 using the ten keypad, then
press the Yes key.
Press the
k
FUNCTION "appears, the press the
Yes key.
Press the
j
OFF.
Press the Yes key, then press the Func-
tion key to return to fax standby mode.
NOTE:
The following descriptions are written assuming that the machine is
in the printer mode. If the machine is not, change mode before
starting these operations.
key until " PC PRINTER
and the
keys to select
k
key until " PC PRINTER
and the
keys to select
k
SETTING UP THE PRINTER
Y/NEXT
SELECT LINE
Y/NEXT
PC PRINTER FUNCTION
PC PRINTER FUNC Y/
ON
OFF
k
Y/NEXT
SELECT LINE
Y/NEXT
PC PRINTER FUNCTION
PC PRINTER FUNC Y/
ON
OFF
k
k
k
j k
k
k
j k
95
Advertisement
Table of Contents
