Table of Contents
Advertisement
Select OK to close the Printer Setup window.
Choose Print from the File menu.
After making any necessary changes to the printing parameters, select
OK to start the print job.
NOTE
It's a good idea to turn off the Print manager if you are feeding pa-
per manually. To do so, clear the Use Print Manager check box in
the Printers dialog box within the control Panel.
If you are feeding paper manually and using the spooler, the printer goes
off-line before printing each page to allow you to insert paper.
Setting Up MS-DOS Application Programs
If you are not using Windows, follow the guidelines in this section for setting
up your MS-DOS applications for use with your printer. If you installed the
INKJET MFP printer driver for Windows (as described previously in this
section) and will be printing only from the Windows environment, you can
ignore this information.
Software applications are designed to work with specific hardware setups.
Most application programs include an installation program or routine that you
run to identify the type of hardware you are using, such as your computer
and printer. When you tell your application program what printer you are
using, it installs a program, called a printer driver, that supports your printer.
Selecting a Printer Driver
The installation programs for most applications offer a list of printer drivers
from which to choose. If you find INKJET MFP on the list, select it. This will
give you the fullest range of features.
If you do not find your printer on the list, you can select a printer that will
have nearly the same operating capabilities as the INKJET MFP.
NOTE:
Software developers continuously create printer drivers. If your ap-
plication software does not list a INKJET MFP driver, call your soft-
ware program's technical support line and ask if a INKJET MFP
driver is available.
USING THE PRINTER WITH YOUR SOFTWARE
121
Advertisement
Table of Contents
