Ricoh MV74 Operator's Manual page 211

SOME ITEMS MUST BE PROGRAMMED FIRST
Selecting the Print Quality
There are three modes: HQ (High Quality), Fine, and HS (Economy). Printing
is slowest in Fine mode.
HQ mode: Use HQ mode for most of your printing needs.
HS mode: Use HS mode when you are printing draft documents.
Fine mode: Use Fine mode for printing on transparencies or printing
halftone images.
Press the Function key and
6,2,2,2,2,6,2 using the ten keypad.
Then press the Yes key.
Press the
MODE " is displayed.
Press the Yes key.
Use the
j
setting.
Press the Yes key to store your setting,
then press the Function key.
NOTE: If you try to test the printing quality, print out the self test using
Function 35 (see page 96).
Setting the Magnification Ratios
To alter the appearance of the output, you can change the horizontal and
vertical magnification ratios.
Horizontal Ratio
Press the Function key and
6,2,2,2,2,6,2 using the ten keypad.
Then press the Yes key.
Press the
TIO " is displayed.
200
key until " FAX PRINT
k
and the keys to select the
k
key until " HORIZ.RA-
k
Y/NEXT
SELECT LINE
Y/NEXT
FAX PRINT MODE
PRINT MODE
HS HQ
k
PRINT MODE
HS HQ
k
Y/NEXT
SELECT LINE
Y/NEXT
HORIZ. RATIO
k
k
Y/
j k
FINE
Y/
j k
FINE
k
k