Ricoh MV74 Operator's Manual page 217

SOME ITEMS MUST BE PROGRAMMED FIRST
CSI
(Telephone number display)
Your CSI appears on the other party's operation panel during communication
instead of your RTI, providing the other party's machine is another
manufacturer's product. The CSI can have up to 20 characters (only
numbers and spaces can be used). Enter your fax machine's telephone
number, because some features of your machine may not work if the CSI is
not the same as the telephone number.
Either:
If you have just entered the TTI in
the previous procedure, press the
Yes key.
Press the Function key and
6,2,2,2,2,6,1 using the ten keypad,
then press Yes key. Press the
until the screen is as shown oppo-
site, then press the Yes key.
Input your telephone number using the
ten keypad.
Example: 4712319266
NOTE: This cannot be more than 20
characters long.
If you wish to input a "+" sign to signify your
international dial access code, press Quick
Dial 09 until it appears at the cursor, then
press the Yes key.
(This is common practice in Europe.)
Inputting and editing are explained on page 168.
Press the Yes key to store your setting.
Finish : Press the Function key.
206
SET CSI
key
k
CSI
4712319266
Y/NEXT
k
KPAD/Y/N
llllllll