Table of Contents
Advertisement
Press the Yes key.
Use the
and the
j
setting.
Press the Yes key to store your setting,
then press the Function key.
NOTE:
The maximum width of printed data is 8.0". If the magnification ra-
tios are set to 100%, both edges of the printed image are cut.
Vertical Ratio
Either:
If you have just entered the Horizon-
tal Ratio in the previous procedure,
Press the Yes key.
Press the Function key and
6,2,2,2,2,6,2, using the ten keypad,
then press the Yes key. Press the
key until the screen is as shown
above, then press the Yes key.
Use the
and the
j
setting. The vertical ratio you can
choose depends on the Horizontal Ra-
tio. For example:
If you have select "HORIZ. RATIO
100%", your choice of vertical ratio is
Auto or 100%.
If you have select "HORIZ. RATIO
94%", your choice of vertical ratio is
Auto or 94%.
SOME ITEMS MUST BE PROGRAMMED FIRST
keys to change the
k
keys to change the
k
HORIZ. RATIO
94%
k
HORIZ. RATIO
94%
VERTICAL RATIO
k
VERTICAL RATIO
AUTO
k
Y/
j k
100%
Y/
j k
100%
k
Y/NEXT
k
Y/
j k
94%
201
Advertisement
Table of Contents
