Ricoh MV74 Operator's Manual page 56

Follow both steps in any order but don't
press the Start key.
Enter the fax numbers as you would
normally do.
Carefully place your fax message
into the document feeder.
Select all required features (such as Send Later).
Resolution and Halftone cannot be stored in a
keystroke program.
Press the Quick Dial key that you wish
to store the program in.
Example: Quick Dial key 01
Make sure that this key is vacant.
To complete the program: Press the Yes key.
NOTE: The procedure that you just stored will now begin. If you do not
wish to use the procedure now, press the Stop key immediately.
Labeling a program
If you store a label for your keystroke programs, the label will appear on the
display when you use the program.
Press the Function Key and 3,4 using
the ten keypad, then press the Yes key.
At this time, you can print a Program List if
you press the
Press the Quick Dial key that holds the
program that you wish to label then the
Yes key.
Example : Quick Dial key 03
Press the Yes key, then input your label
using the Quick Dial keys.
Inputting labels: see page 168.
Press the Yes key. If the display is not
as opposite, press the Yes key again.
key, then press the Start key.
j
PROGRAMMING KEYSTROKES
TRANSMIT
02 XYZ COMPANY
N
TRANSMIT
DIAL FAX NUMBER
PROGRAM
PROGRAM ?
QUICK/
n l
PRINT LIST /SEARCH
j
03
n
PROGRAM LABEL ?
03
n
TRANSMIT REPORT
QUICK/
n l
PRINT LIST /SEARCH
j
Y/START
OPTION
k
Y/N
j k
k
Y/N
ABC Y/N
j k
k
45