Dismantling And Assembling Clutch „A - Audi A8 Workshop Manual

Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
5.4 Dismantling and assembling clutch „A"
Dismantling
– Detach circlip -1- and remove clutch pack -2- from cylinder „A".
– Mark installation position of retaining plate -2- relative to cyl‐
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
inder „A" -item 1- using a scriber -arrows-.
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Press retaining plate down using workshop press with assem‐
bly jig -T10277- .
– Remove circlip -1-.
– Release workshop press.
78
Rep. gr.37 - Controls, housing