Audi A8 Workshop Manual page 28

Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
Gearbox with common gear oil system:
– Unscrew bolt -arrow- and detach oil line from intermediate
flange for front axle drive.
Continued for all gearboxes:
– Slacken bolts on intermediate flange for front axle drive in the
sequence -19 ... 1- and remove bolts.
– Take off intermediate flange for front axle drive and gasket.
– Take off intermediate pinion for front axle drive -1- with input
shaft.
– Take off shims -2- and -3-.
– Remove magnet -arrow- from gearbox housing.
– Turn gearbox on assembly stand.
• The ATF oil pan must face upwards.
24
Rep. gr.37 - Controls, housing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.