Audi A8 Workshop Manual page 43

– Slide twin-lip oil seal onto thrust piece -T40119- .
• The twin-lip oil seal will only fit in one position on the thrust
piece.
– Press in twin-lip oil seal onto stop in gearbox housing.
– Slide magnet -arrow- into gearbox housing, as shown in illus‐
tration.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Install intermediate pinion for front axle drive -1- with input
shaft.
– Fit shims -2- and -3-.
Gearbox with common gear oil system:
– Install oil line on intermediate flange for front axle drive and
tighten bolt -arrow-.
• Tightening torque: 8 Nm
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A6 2005 ➤ , Audi A8 2003 ➤
2. Dismantling and assembling planetary gearbox
39