Audi A8 Workshop Manual page 31

– Detach shim -1- from body „II" using a magnet.
– Lift body „II" -item 1- out of gearbox housing.
– Secure support plate of support -T10283- flush with top edge
of support tube.
– Turn body „II" -item 1- through 180° and place on support -
T10283- .
• The ATF pump end must face downwards.
– Unclip flange washer -1- using two small screwdrivers.
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A6 2005 ➤ , Audi A8 2003 ➤
2. Dismantling and assembling planetary gearbox
27