Audi A8 Workshop Manual page 167

– Press flange shaft into centre differential housing using press
tool -VW 409- and thrust plate -VW 447 i- (place housing on
thrust plate -VW 401- and thrust plate -VW 402- ).
Note
Only insert flange shaft as far as necessary to install circlip.
– Install circlip -arrow- in groove of flange shaft on inner side of
cover.
– Install centre differential housing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
⇒ page 158 .
Audi A6 2005 ➤ , Audi A8 2003 ➤
2. Servicing transfer box
163