Audi A8 Workshop Manual page 144

Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
– Slide fitting tool -T40120/2- onto end of pinion shaft.
– Drive in new pinion shaft oil seal evenly as far as stop using
thrust piece -T40120/1- .
– Pull out oil seal for side shaft using extractor tool -T20143/2- .
– Drive in oil seal for side shaft evenly as far as stop using thrust
piece -T40121- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
140
Rep. gr.39 - Final drive - front differential