Audi A8 Workshop Manual page 94

Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
– Turn inner plate carrier „A" upside down.
– Insert inner plate carrier „A" -item 3- into clutch „A" -item 1-,
turning as required.
– Lift inner plate carrier „A" -item 3- a few millimetres and then
let it drop to check that all the plates have meshed.
♦ If you hear a metallic sound, all the plates have meshed.
♦ If you only hear a muffled sound, some of the plates have not
meshed.
2 - Clutch „E"
– Fit inner plate carrier „B" -item 2- onto clutch „A" -item 1-.
• The lugs on inner plate carrier „B" -item 2- must locate in the
slots in cylinder „A".
– Insert circlip -arrow-.
Note
The circlip must be re-used; take care not to over-stretch it when
installing.
– Make sure that circlip is seated securely all round in groove
on cylinder „A".
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
90
Rep. gr.37 - Controls, housing
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.