Gears, Control; Dismantling And Assembling Gearbox; Removing And Installing End Cover - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
38 –

Gears, control

1

Dismantling and assembling gearbox

1.1

Removing and installing end cover

Special tools and workshop equipment required
♦ Removal lever -80-200-
♦ Engine and gearbox jack -V.A.G 1383 A-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Gearbox support -T10337-
Caution
Do not run engine or tow vehicle with end cover removed or
when there is no ATF in the gearbox.
90
Rep. Gr.38 - Gears, control